Samsung Galaxy M20 SM-M205F Charging Problem Solution
Hello, guys welcome to gsmsharmaji.com. I am going to share Samsung Galaxy M20 SM-M205F Charging related to any problems solution. here we will give you suggestions on resolving this problem with your phone schematic diagram. for example. Charging not showing, unable to charge your phones, connect after shaking charging, Charging Paused Battery Temperature Low, Charging Paused Battery Temperature High, Battery percentage not growth, Battery percentage slow growth, etc charging related problems.
When a premium device like the Samsung Galaxy M20 SM-M205F won’t charge, the problem may lie with the hardware and its components by the way of charging, or it could be a minor issue with the hardware. As an owner, you should do some troubleshooting procedures to determine what the problem is and hopefully be able to fix it.
Hardware Causes of Samsung Galaxy M20 M205F Charging Problem
- Dirt, dust, or debris has accumulated in the charging port.
- The power adapter is damaged or faulty.
- USB cable is no longer working properly.
- You are using the wrong power adapter or weak USB port for your phone.
Samsung Galaxy M20 SM-M205F Charging Ways – Charging Problem Solution
In the schematic diagram hardware image, we draw the Samsung Galaxy M20 SM-M205F charging ways and its attached components check and track check using a multimeter if any components damaged or track damage makes a jumper or component replacement on the Samsung Galaxy M20 motherboard.
Here are some steps to solve Samsung Galaxy M20 SM-M205F charging issue:
- Check Charging Port:
No charging damage to the Samsung Galaxy M20 could be due to a broken USB port corrosion. Water spills can cause corrosion which damages the charging port pin and disconnects the voltage transfer line. So that the line is disconnected and the voltage cannot flow and is saved in the phone battery. Replace the charging USB port immediately if it is damaged and the charger on the phone is not a problem.
2. Check Components And Track:
Check the line on the board If there are damaged or disconnected lines, put the jumper on the way on the PCB board. And also inspect the components to make sure there is no charging damage, change the component. In the picture listed above, there is a component in which the Samsung Galaxy M20 SM-M205F No Charging phone is malfunctioning. Then for the best trick immediately replace the faulty component with a replacement component in good condition.
But if you don’t have a replacement component, it may just remove the jumper on the component that has been damaged. Some of these methods can fix Samsung Galaxy M20 SM-M205F not charging, make sure you perform damage inspection carefully. Use a multimeter tool to measure the positions of each component and path on the damaged PCB board.