Vivo S1 1907 Pattern & FRP Unlock By SP Flash Tool One Click
In this post, I am going to share the Download Vivo S1 1907 Pattern Unlock File. help to detect one click any third-party mobile flashing/Unlocking tool including SP Tool, UMT Dongle, MRT Dongle, NCK Box, Miracle Box, CM2 Dongle. In the following topics. In the following topics, I collected to share Vivo S1 1907 DA File & Scatter File with pre-requirements and steps to erase Pattern, Pin, Password, FRP & Flash Firmware on your Vivo S1 1907 DA File & Scatter File quite easily.
You can use Vivo S1 1907 DA File & Scatter File to Remove Password, Pattern, Pin, FRP Lock, Screen Lock & Upgrade Firmware version quite easily. The procedure is quite simple, all you have to do is download the same model DA file to your computer then run the SP Flash tool click on choose from the DA tab and select the DA file, Now select the firmware in the SP tool and click on Download, that’s it.
Download Vivo S1 1907 Pattern Unlock File Free
Working Model: S1 1907
File Size: 182.34 KB
|Vivo S1 1907 DA File & Scatter File||Click Here|
|SP Flash Tool V5.2112 by_Gsmsharmaji.com||Click Here|
|Very Important USB Driver||LibUSB Driver/ MTK USB Driver|
|Mediatek MTK Bypass Tool V4||Click Here|
- Oppo A15s CPH2179 Pattern & FRP Unlock File Free SP Flash Tool
- Realme Narzo 20 Pattern Unlock RMX2191, RMX2193 Free Tool One ClickDownload Lates
- Vivo Y20 PD2034F Screen unlock File & FRP File Download
How to Unlock Pattern & Frp Lock in Vivo S1:
- First Download All required File & Tool.
- Install WinRAR software on your Pc or laptop to Get extract downloaded Files.
- Extract all File and Then paste into desktop
- Install libusb win32 USB Driver/ MediaTek USB Driver and after that Reboot (Restart) Your Computer
- Open MCT MTK Bypass Tool Click BYPASS
- Switch OFF Phone Press and Maintain Volume Up + Down and Add USB Cable.
Wait Until Improving
- When Done Disable Protection, You can Watch like Below Picture
- Open SP flash Instrument Click Scatter-loading Select button and Choose
- MT6768_Android_scatter File.
- Then Uncheck Preloader.
- Click Download-Agent and Select MTK_AllInOne_DA.
- Go to Option ► Connection and Set Com Port (COM:5) and Baud Rate (921600)
Now Open Device Manager and Check Your Phone Com Port (Check below Image for more Information)
- Now go to Userdata Format Tab and click to Manual flash
Copy 0x223800000 code and paste to Begin Address[HEX]
Copy 0x100000000 code and paste to Format Length[HEX]
- FRP Unlock Code Manual Format Flash.
Copy 0x5508000 code and paste to Begin Address[HEX]
Copy 0x100000 code and paste to Format Length[HEX]
- Click on the Start button
- Wait Until Completed.