Tecno WX3 Pattern & FRP Unlock By SP Flash Tool One Click

In this post, I am going to share the Download Tecno WX3 Pattern & FRP Unlock File. help to detect one click any third-party mobile flashing/Unlocking tool including SP Tool, UMT Dongle, MRT Dongle, NCK Box, Miracle Box, CM2 Dongle. In the following topics. In the following topics, I collected to share Tecno WX3 DA File & Scatter File with pre-requirements and steps to erase Pattern, Pin, Password, FRP & Flash Firmware on your Tecno WX3 DA File & Scatter File quite easily.

You can use Tecno WX3 DA File & Scatter File to Remove Password, Pattern, Pin, FRP Lock, Screen Lock & Upgrade Firmware version quite easily. The procedure is quite simple, all you have to do is download the same model DA file to your computer then run the SP Flash tool click on choose from the DA tab and select the DA file, Now select the firmware in the SP tool and click on Download, that’s it.

Download Tecno WX3 Pattern & FRP Unlock File Free

Working Model: Tecno WX3
Password: www.gsmsharmaji.com
File Size: 149 KB

Name	Download Link
Tecno WX3 DA File & Scatter File	Click Here
SP Flash Tool V5.2112 by_Gsmsharmaji.com	Click Here
Very Important USB Driver	MTK USB Driver

Read More:

How to Unlock Pattern & Frp Lock in Tecno WX3:

First Download All required File & Tool.
Install WinRAR software on your Pc or laptop to Get extract downloaded Files.
Extract all File and Then paste into desktop
Install MediaTek USB Driver and after that Reboot (Restart) Your Computer
Switch OFF Phone Press and Maintain Volume Up + Down and Add USB Cable.
Wait Until Improving
Open SP flash Instrument Click Scatter-loading Select button and Choose
MT6761_Android_scatter File.
Click Download-Agent and Select MTK_AllInOne_DA.
Go to Option ► Connection and Set Com Port (COM:5) and Baud Rate (921600)
Now Open Device Manager and Check Your Phone Com Port (Check below Image for more Information)
Now go to Userdata Format Tab and click to Manual flash
Copy 0xe7000000 code and paste to Begin Address[HEX]
Copy 0xe9f80000 code and paste to Format Length[HEX]
FRP Unlock Code Manual Format Flash.
Copy 0x4fa0000 code and paste to Begin Address[HEX]
Copy 0x100000 code and paste to Format Length[HEX]
Click on the Start button
Wait Until Completed.